Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9822317
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Supply Manual test pump product parameters |
Published: | 2013-10-09 |
Validity: | 300 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Manual pressure test pump working principle of the dual-piston reciprocating pump is vertical, from the high pressure plunger, the plunger body (low-pressure plunger), low pressure tanks, water valves, stents, controller, handles, water tanks and other components . Manual pressure test pump pressure tank and the tank product performance lamp plate fused with screws on the tank, its lower end connected with the water valve, high pressure in the low pressure plunger stopper transcript coaxially mounted, low plunger high-pressure chamber is water tanks, water tanks both the pump, but also the body handles pivot in the bracket, bracket mounting on the cover, and a bolt. Lever handle, low-pressure plunger drive moves up and down within the working volume of the low-pressure tank constantly changing. Handle under the pressure when the suction stroke. At this time, low pressure piston moves upward through the filter, inlet pipe, inlet valve and into the low pressure inside the tank, put on the handle when the compression stroke, when the inlet valve is closed, open the top middle of the valve, pressure test medium into the "high-pressure tank." The so-called "high-pressure tank" is actually low-pressure plunger cavity, both low-intermediate valve tank outlet valve, meaning a "high-pressure water tank inlet valve," high pressure tank, "the suction stroke is low compression tank trip when the handle is pressed down, low plunger cavity pressure test medium is compressed by high pressure plunger channel, along the mountains valve, into the controller, and then is transported within the device swords were tested according to test pump low pressure high flow characteristics, the inlet valve back flow device designed as a combination of valves within the device when the test pressure is less than 0.4MPa when this pump output flow rate for each 100 ml, when the pressure exceeds 0.4M Pa time. In addition to the media pressure tank filled with "high pressure tank", the rest of the test pressure medium flow through the valve inlet valve back together in the same tank. Controllers Installation live bracket above. provided with a control valve, drain valve, working joints , pressure gauges, etc. in order to play the sword "control" role. pump pressure control valve is between the devices were tested valve when the pressure is increased by the sword test device test pressure, ie, the valve should be closed. release valve that is unloading valve In excretion after pressure test pressure test medium used, may be used as the pump discharge valve. gauge ports placed damping plate. to reduce the pressure gauge pointer swings. working over joints connected with work, is the chemical pump the test device is a soft coupling member, the pump working with the subject of the device over the connecting portion size M18 × 1.5. |
Admin>>>
You are the 8505 visitor
Copyright © GuangDong ICP No. 10089450, Hydraulic and Mechanical Technology Co., Ltd. on the Hai Kaang All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8505 visitor
Copyright © GuangDong ICP No. 10089450, Hydraulic and Mechanical Technology Co., Ltd. on the Hai Kaang All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility